|
The MTS-2150 is a graphical monitoring and control program for use with the Manta Test Systems MTS-5000, MTS-3000, MTS-1700 or MTS-1030 instruments.
Display liveEphasor diagrams and numeric values for ac quantities in primary, secondary or per unit
scales. Interactively perform static or dynamic relay testing with flexible control over 3-phase voltage
and current quantities. Calculate and visualize symmetrical components, impedance, power and other protection
measurement quantities against relay characteristics.
| Benefits |
- Monitor values of complex relaying quantities during testing
- See power system quantities in primary or per unit values while
testing using secondary values
- Easily set up arbitrary or typical test conditions
- Improve understanding of power system and protection quantities
|
|
| Capabilities |
- Use as a graphical visualization and calculation tool for electrical quantities used in power system protection
- Use to monitor graphically MTS-1700, MTS-3000, MTS-5000 instrument outputs or MTS-1030 measurements
- Use to control MTS-1700, MTS-3000 and MTS-5000 instrument outputs and perform individual amplitude/phase/frequency adjustments or complex multi-phase adjustments easily
- Graphical display of voltage/current phasors
- Graphical display of phase-phase phasors, symmetrical components, and power
- Graphical display of positive sequence impedance and loop impedance against mho relay characteristics
- Graphical display of apparent R-X against quadrilateral relay characteristics
- Graphical display of AC waveforms
- Create waveform files in IEEE COMTRADE standard format
- Direct display of voltage unbalance, current unbalance
- Numerical display of phase-phase values, symmetrical components, power, positive sequence impedance, negative sequence impedance, loop impedance, and apparent R-X
- Display of all quantities in secondary values, primary values or per unit values
- Simulate phase-to-ground, phase-phase, 3-phase and 2-phase-to-ground faults
- Program multistage faults for more complex applications
- Save/recall all settings to/from files
- Printing of numeric quantities to a printer
- Plus much, much more!!
|
|
| Applications |
- Protection relay testing
- Visualization and calculation of relaying quantities
- PC-based control and monitoring of your MTS-1700, MTS-3000, MTS-1030 or MTS-5000
|
NOTE: Even if you are not an MTS-1700, MTS-3000 or MTS-5000 User,
you will find that this is an invaluable learning and visualization tool.
NOTE: All specifications are subject to change
Contact us for an evaluation version
|
