Applications

• Simulation of auxiliary signals such as permissive trip, block, reclosure initiate, breaker open,
  etc for protection panel testing
• Automated testing of multiple output contact relays
• Sequence of events recording
• Routing of currents and voltages for testing multiple elements

Power Supply

• Single phase 105-130 VAC/60Hz @ 1A max (or 210-250 VAC/50 Hz @ 0.5A max when ordered with option 02), factory set

Output Channels

• Up to 16 galvanically isolated channels with 5-way binding posts
• DC/AC switching at up to 300Vpeak/300mA
• Three output styles available (see option 03D)
• LED indicates "closed contact"
• Test pushbutton provided for each channel

Input Channels

• Up to 16 isolated 3-terminal channels, accepting shrouded plugs, using 4-channel modules
• Up to 64 bank selectable, 3-terminal channels, using 16-channel modules
• DC/AC sensing from 10 - 300V peak, at >50kohms (Strappable for 5V or 10V logic sensing input)
• Contact sensing, dry or wet contact to 300V peak, @ >50kohms
• 1ms debounce time for change of state of input signal
• LED indicates closed contact or voltage presence
• Test pushbutton provided for each channel

Physical Characteristics

• 19"W x 6"H x 18"D (48.3cm x 14.7cm x 45.7cm)
• Weight 16lbs (7.3kg)
• Modular plug-in construction
• Built-in carry handle/tilt stand, Rear support feet

Options

• Option 02 240VAC, 50/60 Hz line input
• Option 03C1-5 Input module, containing 4 isolated 3-terminal channels, LED indicators, and test pushbutton (5V logic voltage sensing)
• Option 03C1-12 Input module, containing 4 isolated 3-terminal channels, LED indicators, and test pushbutton (10V or greater logic voltage sensing)
• Option 03C2-5 16 channel input module, 3-terminal channels, LED indicators (5V logic voltage sensing)
• Option 03C2-12 16 channel input module, 3-terminal channels, LED indicators (10V or greater logic voltage sensing)
• Option 03D Output module, 4 isolated channels with 5-way binding posts, LED indicators, and test pushbuttons. Variations available listed below:

• Option 05 1 Year extended warranty. Additional year for a total of 2 years
• Full-Service Agreement Preventative maintenance, calibration and service plan
• Option 10 Hardshell shipping case
• Option 11Cordura carry case
• Option 14 19 inch Rackmount enclosure
• 12-3415-00 LED Photo Sensor Cable - for sensing operation of LED targets

Download full MTS-1700 Series brochure 9.8MB PDF format

System Components

• MTS-1710 Advanced Universal Protective Relay Test System - Main unit
• MTS-1720 Two Channel Current Source
• MTS-1730 Digital Input/Output Signal Conditioner
• MTS-1750 High Current Source
• MTS-1753 Three Channel High-Current Source
• MTS-1800 MWave End-to-End Testing Software
• MTS-1860 GPS Receiver Kit
• End-to-End Testing