Highlights

• Calibrate voltage, current, Watt, VAr and frequency meters
• Calibrate all single and three phase power meters
• Semi-automated or fully automated testing capable

Specifications

• Single phase 108-133 VAC/60Hz (or 216-264 VAC/50Hz), 200VA max, factory set

Single phase AC voltage:

• 0-155V rms, 15 VA maximum
• Accuracy +/-0.1%of full scale +/-2 least significant digits, for 10%-100% of full scale
• Four color coded output terminals, A, B, C, N provided.
• Selectable phase-phase (A-B, C-B, C-A) or phase-neutral (A-N, B-N, C-N) output
• All phase-neutral, or A-B plus C-B outputs, may be selected simultaneously

Single phase AC current:

• 0-6A rms, 18 VA maximum
• Accuracy +/-0.1%of full scale +/-2 least significant digits, for 10%-100% of full scale
• Three pairs of color coded output terminals, A, B, C provided.
• Each phase output and polarity independently controllable, and group reverse switch provided

Phase angle:

• Power factor is pushbutton selectable between 1.0 and 0.5
• Angle between current and voltage adjustable between -90 to +90 deg, accuracy resolution: 1 degree.

Frequency:

• Default 60.00Hz
• Variable 50.00 - 70.00 Hz (crystal controlled, 0.01% accuracy)
• Optional 45.00 - 55.00 Hz range

RS-232C Interface

• Standard DB-25 female connector
• Baud rates: 300 to 19200 baud
• Easy-to-use terminal mode
• Interface is optically isolated from power circuitry

Stepping:

• Voltage, current, Watts, VARs, or frequency may be stepped
• Start, stop, step value, and delay between steps independently adjustable

Configuration:

• Multiple configuration setups with custom procedure name, voltage current output selection, P.T., C.T. ratios, and user defined prompts can be saved in non-volatile memory.
• Primary readings can be displayed

Default values:

• Power-up default values of all output parameters plus primary P.T. C.T. ratios can be saved in non-volatile memory.

Physical Characteristics

• 14.5"W x 7.5"H x 15.5"D (36.8cm W x 19cm H x 39.4cm D)
• Weight: 24.0 lbs (11 kg)

Options

• Option 02: Cordura carry case
• Option 03: Test leads- 6ft leads for connecting the voltage and current outputs to the meter(s) under test
• Option 04A: 120V nominal AC line voltage input
• Option 04B: 240V nominal AC line voltage input
• Option 05A: 60Hz nominal AC frequency
• Option 05B: 50Hz nominal AC frequency
• Option 07: Extra manual
• Option 08: 1 Year extended warranty. Additional year for a total of 2 years
• Full-Service Agreement Preventative maintenance, calibration and service plan